Description
U-Pol Dolphin Glaze Putty UP0714
- Extra smooth, very easy to spread
- Resistant to solvents in 15 to 20 min
- Self-leveling, pinhole free formulation
- Quick drying enhances productivity
- Effortless sanding capabilities
- Unparalleled adhesion to most substrates
- Extra smooth, easy to spread
U-Pol Dolphin Glaze Putty is a two-part polyester putty that is used to fill in minor dents and imperfections in metal and plastic surfaces. It is self-leveling and easy to sand, making it a great choice for DIYers.
Here are the steps on how to use U-Pol Dolphin Glaze Putty:
- Clean the surface to be filled with a mild soap and water solution.
- Apply a thin coat of Dolphin Glaze Putty to the dent or imperfection.
- Allow the putty to dry for 20 minutes.
- Sand the putty smooth with a fine-grit sandpaper.
- Prime the surface with a primer compatible with the type of paint you will be using.
- Apply the paint in thin coats, allowing each coat to dry completely before applying the next.
Here are some tips for using U-Pol Dolphin Glaze Putty:
- Use a light touch when applying the putty. Too much putty will cause the surface to be uneven.
- Allow the putty to dry completely before sanding it.
- Sand the putty smooth with a fine-grit sandpaper.
- Prime the surface before applying the paint. This will help the paint to adhere to the putty.
- Apply the paint in thin coats, allowing each coat to dry completely before applying the next.
