Edit Content

Start Here

Start Here

U-POL DOLPHIN GLAZE UP0714 Premium Self-Leveling Finishing Glaze, 14.8 fl-oz Soft Filler Bag

$29.95

Description

U-Pol Dolphin Glaze Putty UP0714

  • Extra smooth, very easy to spread
  • Resistant to solvents in 15 to 20 min
  • Self-leveling, pinhole free formulation
  • Quick drying enhances productivity
  • Effortless sanding capabilities
  • Unparalleled adhesion to most substrates
  • Extra smooth, easy to spread

 

U-Pol Dolphin Glaze Putty is a two-part polyester putty that is used to fill in minor dents and imperfections in metal and plastic surfaces. It is self-leveling and easy to sand, making it a great choice for DIYers.

Here are the steps on how to use U-Pol Dolphin Glaze Putty:

  1. Clean the surface to be filled with a mild soap and water solution.
  2. Apply a thin coat of Dolphin Glaze Putty to the dent or imperfection.
  3. Allow the putty to dry for 20 minutes.
  4. Sand the putty smooth with a fine-grit sandpaper.
  5. Prime the surface with a primer compatible with the type of paint you will be using.
  6. Apply the paint in thin coats, allowing each coat to dry completely before applying the next.

Here are some tips for using U-Pol Dolphin Glaze Putty:

  • Use a light touch when applying the putty. Too much putty will cause the surface to be uneven.
  • Allow the putty to dry completely before sanding it.
  • Sand the putty smooth with a fine-grit sandpaper.
  • Prime the surface before applying the paint. This will help the paint to adhere to the putty.
  • Apply the paint in thin coats, allowing each coat to dry completely before applying the next.